Home
Latest images
Register
Log in
முகப்பு
தேடல்
உறுப்பினர்கள்
பயனர் தகவலறை
புதிய தனி மடல் இல்லை
பதிவு செய்
உள் நுழை
சார்லஸ் mcநிறுவனர்
- Posts : 16182
Join date : 18/12/2012
Location : தேவன் கிறிஸ்தவ களஞ்சியம் 
கிறிஸ்துமஸ் நட்சத்திரம் (ஸ்டார்) செய்வது எப்படி? (ஆங்கிலத்தில் செய்முறை - படங்கள்)
Wed Nov 26, 2014 11:35 pm
The pieces already cut that have been showcased below are a little different from the ones provided in the template, the ones that you will print and cut yourself. The instructions are the same though and for a better understanding, the three different pieces below have been labeled A, B and C.
Pieces A and C are different because they feature a small hole through which you will introduce a thread that will later tie the star together, they are different because basically piece A wears the hole near the outside edge while piece C wears it in the middle.
Piece C and A will be cut one time each while piece B will be cut three times for this tutorial. If you have the possibility add dotted lines for a smooth professional fold. You can use a needle to dot it a little yourself if you do not have any other method at hand.
In this tutorial a double-sided cardstock has been used for explanatory purposes, basically the right side is the dark blue one while the wrong side side is the light blue one. After cutting the five pieces of star out of your print, lay them down with the wrong side up and the long flap close to you to begin the folding of the four long folds away from you.
To ensure smooth connections between volumes open the entire piece out again and with the right side up this time fold both short flaps toward you.
Pieces A and C are different because they feature a small hole through which you will introduce a thread that will later tie the star together, they are different because basically piece A wears the hole near the outside edge while piece C wears it in the middle.
Piece C and A will be cut one time each while piece B will be cut three times for this tutorial. If you have the possibility add dotted lines for a smooth professional fold. You can use a needle to dot it a little yourself if you do not have any other method at hand.
In this tutorial a double-sided cardstock has been used for explanatory purposes, basically the right side is the dark blue one while the wrong side side is the light blue one. After cutting the five pieces of star out of your print, lay them down with the wrong side up and the long flap close to you to begin the folding of the four long folds away from you.
To ensure smooth connections between volumes open the entire piece out again and with the right side up this time fold both short flaps toward you.
- சார்லஸ் mcநிறுவனர்
- Posts : 16182
Join date : 18/12/2012 Location : தேவன் கிறிஸ்தவ களஞ்சியம்
Re: கிறிஸ்துமஸ் நட்சத்திரம் (ஸ்டார்) செய்வது எப்படி? (ஆங்கிலத்தில் செய்முறை - படங்கள்)
Wed Nov 26, 2014 11:37 pm
The piece A, the one with the hold on the edge, will be the first tasting glue, apply paper glue on the single long flap. You can also apply tape in these areas but the holding power of glue is recommended.
Lay the piece down now and press the outside edge over the glued edge to glue it into place.
Now simply repeat the process for all five points of the start, finishing it with the C piece. If you maintain this order you will basically have them dried in the order you need them for the next step when you are going to glue them together. Now to glue the five points into the desired shape we should respect the order A-B-B-B-C. This is utterly important because the piece A and C have those small holes adjacent to each other, these pieces will not be glued together. Start with A, which hopefully, is the first piece that you have glued together and apply glue to the two bottom flaps.
Insert the two glued flaps in the interior of another two plain edges, part of a piece B, as shown below.
- சார்லஸ் mcநிறுவனர்
- Posts : 16182
Join date : 18/12/2012 Location : தேவன் கிறிஸ்தவ களஞ்சியம்
Re: கிறிஸ்துமஸ் நட்சத்திரம் (ஸ்டார்) செய்வது எப்படி? (ஆங்கிலத்தில் செய்முறை - படங்கள்)
Wed Nov 26, 2014 11:39 pm
Hold them into place until they dry out properly.
Repeat the process, apply glue to the two flaps of the piece you have glued on. Repeat the process for all the remaining B pieces.
Now for the ending point of the star it might be easier for you to just fold the entire star accordion like and with caution glue the C piece one flap at a time whilst holding them into place until they dry.
At this point it should as showcased below. Between A and C a gap remained, this will allow you to fold the star flat for storage later on. Most paper lanterns brought from a store will arrive folded in a similar manner. If you want only to hang it and have no intent in storing it later on you can just glue it together for good.
To hang it through a thread or string make use of a needle and a long piece of monofilament thread that looks invisible; insert the needle into one of the holes as displayed below.
Repeat the process, apply glue to the two flaps of the piece you have glued on. Repeat the process for all the remaining B pieces.
Now for the ending point of the star it might be easier for you to just fold the entire star accordion like and with caution glue the C piece one flap at a time whilst holding them into place until they dry.
At this point it should as showcased below. Between A and C a gap remained, this will allow you to fold the star flat for storage later on. Most paper lanterns brought from a store will arrive folded in a similar manner. If you want only to hang it and have no intent in storing it later on you can just glue it together for good.
To hang it through a thread or string make use of a needle and a long piece of monofilament thread that looks invisible; insert the needle into one of the holes as displayed below.
- சார்லஸ் mcநிறுவனர்
- Posts : 16182
Join date : 18/12/2012 Location : தேவன் கிறிஸ்தவ களஞ்சியம்
Re: கிறிஸ்துமஸ் நட்சத்திரம் (ஸ்டார்) செய்வது எப்படி? (ஆங்கிலத்தில் செய்முறை - படங்கள்)
Wed Nov 26, 2014 11:41 pm
The illustration below will explain the procedure better.
Get the needle out through the other hole. This will leave the loop hanging out of the first hole, allowing you to insert the needle back through the loop.
After pulling out the thread simply tie the piece together, closing the gap and offering the viewer the illusion that it “floats” in the air magnificently.
You are done! The extraordinary diy paper lantern has been materialized. It is extremely easy and yet extremely rewardful. What do you think?
Get the needle out through the other hole. This will leave the loop hanging out of the first hole, allowing you to insert the needle back through the loop.
After pulling out the thread simply tie the piece together, closing the gap and offering the viewer the illusion that it “floats” in the air magnificently.
You are done! The extraordinary diy paper lantern has been materialized. It is extremely easy and yet extremely rewardful. What do you think?
- Sponsored content
Permissions in this forum:
You cannot reply to topics in this forum